Skip to Content

H2BQ Product Solutions

ROADFLEX RF800


ROADFLEX RF800 is a polymeric dispersion specially developed for soil stabilisation, which can be diluted with water.

When ROADFLEX RF800 is incorporated into the soil, the product form bonds on a molecular level between the soil molecular level between the soil or aggregate particles.

ROADFLEX RF800 causes a long-lasting structural bonding and cross-linking, which a stable and simulaneously elastic layer is created.

In this way, ROADFLEX RF800 produces a durable and water-resistant substrate.


APPLICATION

• Higher application rates in combination with with a low cement content can produce a much higher soil CBR value.

• ROADFLEX RF800 improves the adhesion, increases flexural strength, increases deformability (optimises modulus of elasticity,increased elongation at break) and increases abrasion resistance


PROCESSING

The product is supplied in 1000 kg disposable IBC containers.

• ROADFLEX RF800 can be added to the water to achieve the optimum water content.

• ROADFLEX RF800 can be installed with standard industry equipment during soil preparation RF800 is sprayed into the milling chamber. (mixed-in-place method)

• Processing is possible from as low as 4 °C.


STORAGE

If ROADFLEX RF800 is stored in tanks, appropriate storage conditions must be observed. In the case of cool storage (below 25 °C, but frost-free) in the unopened original containers, ROADFLEX RF800 has a shelf life of six months from the date of delivery.

ROADFLEX RF800 has a shelf life of six months from the date of delivery.

When stored in tanks, to avoid microbial contamination, dispersion should be modified with a preservative.

In addition, the tanks should be properly cleaned before.

In storage tanks where the product is not stirred, it is advisable to cover the surface of the dispersion with 1 – 2 cm of water to which a preservative has been added.

This prevents skin formation and microbial contamination. When storing in silos, it is important that the air sucked into the silo when emptying the product is also kept free of germs.


CHARACTERISTICS

Solid content: 45 – 50 % (DIN EN ISO 3251) 

iscosity, dynamic: 200 – 1000 mPa.s (DIN EN ISO 2555) 

Ph-value: 5– 7

Density: 1,05 – 1,08 g/cm³ (ISO 2811) 

Appearance: milky-opaque


INFO

In case ROADFLEX RF800 is used in applications other than those applications mentioned, the selection, processing and use is the sole responsibility of the purchaser of ROADFLEX RF800. All legal and other regulations must be observed.


SAFETY INSTRUCTIONS

Comprehensive instructions are given in the corresponding safety data sheets. These are available on request from the supplier.


More Informations

ROADFLEX RF850


ROADFLEX RF850 is a soil additive.

ROADFLEX RF850 is an aqueous solution for the application to various soils.

The product forms bonds between soil or aggregate particles.


APPLICATION

• In mixed-in-place or factory production, the additive imparts, among other things, water repellency to the soil material.

• ROADFLEX RF850 improves adhesion, increases adhesion, increases flexural strength, positive impact of elasticity and increases abrasion resistance.


PROCESSING

Product packed in 25 kg disposable canisters and disposable IBC 1000 kg container.

• Admixture during the milling and mixing process of the soil, which is carried out with standard road construction and soil stabilisation equipment.

• Processing is possible from as low as 4 °C.


STORAGE

ROADFLEX RF850 should be stored in the original containers.

ROADFLEX RF850 has a shelf life of six months.

The storage temperature should not fall below 0 °C.


CHARACTERISTICS

Viscosity, dynamic: 10 – 100 mPa.s (DIN EN ISO 2555)

Ph-value: 10– 13

Density: 1,2 – 1,30 g/cm³ (ISO 2811)

Appearance: clear-milky-opaque


RECOMMENDATION

For optimum results in soil stabilisation, the application of the additive ROADFLEX RF850 in combination with ROADFLEX RF800, is recommended.


INFO

If ROADFLEX RF850 is used in other applications other than those mentioned, the choice is up to you, processing and use of ROADFLEX RF850 is the sole responsibility of the of the purchaser. All legal and other regulations must be observed.


SAFETY INSTRUCTIONS

Comprehensive instructions are given in the corresponding safety data sheets. These are available on request from the supplier.


More Informations

DUSTCONTROL DC100


DUSTCONTROL DC100 is an aqueous, pre-mixed emulsion for efficient and reliable dust control.

DUSTCONTROL DC100 is an aqueous emulsion for dust reduction based on magnesium chloride.

Due to special modifications, the product is not corrosive to surfaces and metals. Due to its strong hygroscopic property, the soil is kept continuously damp and thus prevents the formation of dust. Due to its special formulation, DUSTCONTROL DC100 is suitable formulation is highly effective at both low and high humidity.

Even after precipitation functionality is maintained.


APPLICATION

• DUSTCONTROL DC100 is a ready-to-use aqueous solution, which at the recommended amount, prevents the formation of dust for several months, depending on the load and environmental influences.

• For temporary dust binding, DUSTCONTROL DC100 can also be diluted with water. A dust reduction of several weeks is thereforepossible.


STORAGE

The product is supplied in 1000 kg disposable IBC containers.

• When DUSTCONTROL DC100 is stored in tanks, proper storage conditions must be observed.

• For unopened DUSTCONTROL DC100 original containers will have a shelf life of six months from the date of receipt guaranteed.


PROCESSING

• For long-term dust binding with DUSTCONTROL DC100 we recommend the application of 2 litres/m².

• DUSTCONTROL DC100 can be applied with all existing irrigation equipment with spray bars.

• For temporary dust binding DUSTCONTROL DC100 can be diluted with water. Application rate also 2 litres/m².

• Mixing ratio water/DUSTCONTROL DC100 is 9:1.

• If the effect decreases DUSTCONTROL DC100 can be reapplied again. Recommendation: 1 litre/m².

• In order to achieve the maximum performance of DUSTCONTROL DC100, the area of the sprayed surface should only be visually damp before reopening to traffic. (no more puddles present)

• Until DUSTCONTROL DC100 has penetrated the road base, we recommend blocking the road.

• If blocking the road is not possible, we recommend a maximum speed of 20 km/h.

• All devices must be cleaned with water after application


INFO

Should DUSTCONTROL DC100 be used in applications other than those applications mentioned, the selection, processing and use is the sole responsibility of the purchaser of DUSTCONTROL DC100. All legal and other regulations must be observed.


SAFETY INSTRUCTIONS

Comprehensive instructions are given in the corresponding safety data sheets. These are available on request from the supplier.


More Informations

DUSTCONTROL DC300


DUSTCONTROL DC300 is an environmentally friendly, aqueous solution for dust reduction based on natural, renewable raw materials.

DUSTCONTROL DC300 ensures by its composition that the soil is kept continuously moist. Due to the properties of DUSTCONTROL DC300 as a binder, it not only reduces dust formation but also sustainably consolidates the dust formation but also sustainably consolidates the subsoil. Thus, DUSTCONTROL DC300 ensures a higher quality of the roads and reduces maintenance measures.


APPLICATION

• DUSTCONTROL DC300 is a ready-to-use, aqueous solution. At the recommended application rate, it prevents dust formation for several weeks, depending on the traffic load and environmental influences.

• DUSTCONTROL DC300 can also be applied diluted with water for temporary dust binding.


STORAGE

The product is supplied in 1000 kg disposable IBC containers.

• When DUSTCONTROL DC300 is stored in tanks, proper storage conditions must be maintained.

• Unopened DUSTCONTROL DC300 original containers are guaranteed to have a shelf life of six months from the date of receipt.


PROCESSING

• For temporary dust binding up to several weeks, we recommend the use of 1 l/m² DUSTCONTROL DC300 in undiluted condition.

• For temporary dust binding up to several days, we recommend the use of 1 l/m² DUSTCONTROL DC300 diluted with water (mixing ratio: 1 part water : 1 part DUSTCONTROL DC300).

• If the effect decreases, a refreshment with the same application quantity is recommended.

• We recommend cleaning the equipment with water after use.

• The exact application quantities depend on the composition of the soil and must therefore be adapted to the local conditions.


INFO

Should DUSTCONTROL DC300 be used in applications other than those applications mentioned, the selection, processing and use is the sole responsibility of the purchaser of DUSTCONTROL DC300. All legal and other regulations must be observed.


SAFETY INSTRUCTIONS

Comprehensive instructions are given in the corresponding safety data sheets. These are available on request from the supplier.


More Informations